Woman in straw hat smiles, holding wine glass near a lake.

Concrete and Foundations That Stay Level

M&M Home Solutions coordinates foundation repairs, concrete flatwork, and stone masonry projects in West Haven and surrounding areas through experienced contractors.

When a garage floor sinks toward the center, basement walls curve inward from soil pressure, or a driveway develops cracks wide enough to catch a wheel, the problem is not cosmetic. These are signs that the concrete or foundation beneath your West Haven and neighboring communities home is shifting, settling, or failing under load. M&M Home Solutions works with contractors who handle foundation stabilization, concrete resurfacing, slabjacking, and masonry repairs using methods that address the underlying cause rather than covering symptoms.

Services include poured concrete retaining walls to manage grading and erosion, flatwork installation for driveways, patios, and sidewalks, and tuckpointing to restore mortar joints in older brick structures. Decorative options such as stamped or stained concrete provide texture and color that resemble natural stone or wood. For homes with sinking foundations, piering and underpinning systems use steel or concrete piers driven into bedrock to lift and stabilize the structure. Slabjacking raises sunken garage floors or walkways by injecting grout or polyurethane foam beneath the slab. Bowing basement walls are reinforced with carbon fiber straps or steel beams in West Haven and beyond properties where soil pressure has caused inward movement.

If your foundation shows cracking, your concrete has settled unevenly, or your masonry needs repointing, contact M&M Home Solutions to arrange an assessment.

Methods Used to Repair and Stabilize Concrete

Foundation repairs in West Haven and surrounding areas begin with identifying the source of movement, whether it is soil erosion, water intrusion, or inadequate support. For sinking structures, steel or concrete piers are driven through unstable soil until they reach bedrock or load-bearing strata, then hydraulic jacks lift the foundation back to level. Slabjacking involves drilling small holes in sunken concrete and pumping a grout mixture or expanding foam underneath until the slab floats back into position.

After the work is complete, you will notice that doors and windows close without sticking, floors no longer slope toward one side of the room, and cracks in drywall stop widening. Garage floors sit level again, allowing water to drain toward the door instead of pooling in the center. Basement walls that were bowing inward are held in place by steel beams or carbon fiber reinforcement, preventing further movement even during heavy rain or freeze-thaw cycles.

For masonry work, old mortar is removed from brick joints using a grinder or chisel, and new mortar is applied to match the original color and texture. Retaining walls are poured with rebar reinforcement and proper drainage to prevent soil pressure from cracking the structure. Flatwork such as driveways and patios is poured over compacted gravel base and finished with broom texture, exposed aggregate, or stamped patterns. Resurfacing applies a thin, high-strength coating over existing concrete to hide minor cracks and discoloration without full replacement. This work does not include excavation for new basements or structural additions.

Details homeowners ask about before foundation and concrete repairs

Foundation and concrete projects involve decisions about technique, timing, and whether repairs will hold long-term. The questions below cover what comes up most often during planning in West Haven and beyond.

Checkmark icon inside a circle.
What causes a basement wall to bow inward?
Soil pressure from saturated ground or frost heave pushes against the wall, causing it to curve inward over time. Steel beams or carbon fiber straps are installed to stop the movement and prevent collapse.
Check mark inside a circle.
How does slabjacking compare to replacing a sunken concrete slab?

Slabjacking lifts the existing slab by filling voids underneath, which costs less and finishes faster than removal and replacement. It works well when the concrete itself is not cracked or structurally compromised in West Haven and neighboring communities.

A black check mark inside a black circle.
Why does tuckpointing matter for older brick homes?
Mortar deteriorates faster than brick, and open joints allow water to enter the wall, causing freeze damage and interior leaks. Tuckpointing restores the seal and prevents further brick movement or cracking.
Check mark in a black circle.
What is the difference between piering and slabjacking?
Piering stabilizes sinking foundations by anchoring the structure to bedrock with steel or concrete piers. Slabjacking raises sunken concrete slabs like garage floors or sidewalks by injecting material beneath them. Both address settling, but piering is used for deeper structural support.
Black check mark inside of a black circle.
When should a retaining wall be replaced instead of repaired?

If the wall is leaning significantly, has large cracks running through multiple blocks, or lacks proper drainage, replacement is usually necessary. Minor mortar damage or surface cracking can often be repaired without rebuilding the entire structure in West Haven and beyond.

M&M Home Solutions coordinates foundation, concrete, and masonry projects throughout West Haven, connecting homeowners with contractors who handle piering, slabjacking, tuckpointing, and decorative flatwork. If your property shows signs of settling or your concrete needs resurfacing, get in touch to review repair options and schedule an evaluation.